D-Link DGS-1210/ME series - Show Igmp_Snooping Forwarding

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
331
Description
The show igmp_snooping group
command displays the current
IGMP snooping group configuration on the Switch.
Parameters
vlan <vlan_name 32> − The name of the VLAN for which IGMP
snooping group configuration information is to be displayed.
Up to
32 characters can be used.
vlanid <vidlist> −
The ID of the VLAN for which IGMP snooping
group configuration infor mation is to be displayed.
<ipaddr> − The IP address of the VLAN for which IGMP snooping
group configuration infor mation is to be displayed.
{data_driven} −
Specifies to display the data driven of IGMP
snooping group.
Restrictions None.
Example usage:
To show igmp snooping group:
DGS-1210-28MP/ME:5# show igmp_snooping group vlan default
Command: show igmp_snooping group vlan default
Total Entries : 0
DGS-1210-28MP/ME:5#
show igmp_snooping forwarding
Purpose
To display the IGMP snooping forwarding table entries on the
Switch.
Syntax
show igmp_snooping forwarding {vlan <vlan_name 32> | vlanid
<vidlist>}
Description
The show igmp_snooping forwarding
command displays the
current IGMP snooping forwarding table entries currently configured
on the Switch.
Parameters
vlan <vlan_name 32> − The name of the VLAN for which IGMP
snooping forwarding table information is to be displayed. Up to 32
characters can be used.
vlanid <vidlist> − The vid
of the VLAN for which IGMP snooping
forwarding table information is to be displayed.
Restrictions None.
Example usage:
To view the IGMP snooping forwarding table for VLAN ‘Trinity’:
DGS-1210-28MP/ME:5# show igmp_snooping forwarding vlan default
Command: show igmp_snooping forwarding vlan default
VLAN Name : Trinity
Multicast group : 224.0.0.2
MAC address : 01-00-5E-00-00-02
Port Member : 3,4
Total Entries : 1