D-Link DGS-1210/ME series - Enable Authen_Policy; Disable Authen_Policy

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
443
method list name.
• Method Name – Defines which security protocols are
implemeted, per method list name.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
DGS-1210-28MP/ME:5# show authen_enable all
Command: show authen_enable all
Method List Name Priority Method Name Comment
------------------------ -------- ------------------- ------------------
default 1 local Keyword
DGS-1210-28MP/ME:5#
enable authen_policy
Purpose To enable the authentication policy on the Switch.
Syntax
enable authen_policy
Description
The enable authen_policy command enables the authentication
policy on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable the authentication policy:
DGS-1210-28MP/ME:5# enable authen_policy
Command: enable authen_policy
Success.
DGS-1210-28MP/ME:5#
disable authen_policy
Purpose To disable the authentication policy on the Switch.
Syntax
disable authen_policy
Description
The disable authen_policy command disables the authentication
policy on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To disable the authentication policy: