DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
116
Description
The disable snmp IMPB_violation traps command enables SNMP
IMPB violation traps support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To disable SNMP IMPB violation traps support on the Switch:
DGS-1210-28MP/ME:5# disable snmp IMPB_violation traps
Command: disable snmp IMPB_violation traps
Success.
DGS-1210-28MP/ME:5#
enable snmp firmware_upgrade_state traps
Purpose To enable SNMP firmware upgrade state traps.
Syntax
enable snmp firmware_upgrade_state traps
Description
The enable snmp firmware_upgrade_state traps command
enables SNMP firmware upgrade state traps support on the Switch.
After enables the SNMP firmware upgrade state traps support, the
Switch will send out a trap to the SNMP manage host whe
firmware upgrade is succeed or fail.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To enable SNMP firmware upgrade state traps support on the Switch:
DGS-1210-28MP/ME:5# enable snmp firmware_upgrade_state traps
Command: enable snmp firmware_upgrade_state traps
Success.
DGS-1210-28MP/ME:5#
disable snmp firmware_upgrade_state traps
Purpose To disable SNMP firmware upgrade state traps.
Syntax
disable snmp firmware_upgrade_state traps
Description
The disable snmp firmware_upgrade_state traps command
disables SNMP firmware upgrade state traps support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To disable SNMP firmware upgrade state traps support on the Switch:
DGS-1210-28MP/ME:5# disable snmp firmware_upgrade_state traps
Command disable enable snmp firmware_upgrade_state traps
To Next Page
Loading...
