D-Link DGS-1210/ME series - Show Mld_Snooping Host

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
358
vlanid <vidlist> | all ] [dynamic | static | forbidden]
Description
The show mld_snooping mrouter_port
command displays on
dynamically learnt and static multicast router interfaces.
Parameters
vlan_name <string 32> – Specifies on which VLAN
mld snooping
groups should be shown.
vlanid <vidlist> – Displays that the mld snooping applies only to this
previously created VLAN id.
all – Displays that all MLD snooping which configured for all VLANs
on the Switch.
static − Displays statically configured MLD router ports.
dynamic − Displays dynamically configured MLD router ports.
forbidden – Displays forbidden router ports that have been statically
configured.
Restrictions None.
Example usage:
To show the MLD_snooping mrouterport:
DGS-1210-28MP/ME:5# show mld_snooping mrouter_ports vlanid 1 static
Command: show mld_snooping mrouter_ports vlanid 1 static
VLAN Name : default
Static router port : 1-3
Total Entries : 1
DGS-1210-28MP/ME:5
show mld_snooping host
Purpose To display information of MLD snooping host on the Switch.
Syntax
show mld_snooping host [vlan_name <string 32> | vlanid
<vidlist> | all | ports <portlist> | group <ipv6_addr>]
Description
The show mld_snooping host command displays information of
MLD snooping host on the Switch.
Parameters
vlan_name <string 32> –
Specifies on which VLAN mld snooping
groups should be shown.
vlanid <vidlist> – Displays that the mld snooping applies only to this
previously created VLAN id.
all – Displays that all MLD snooping which configured for all VLANs
on the Switch.
ports <portlist> –
Specifies the ports of MLD snooping host to be
displayed.
group <ipv6_addr> – Specifies the IPv6 address.
Restrictions None.
Example usage:
To show the MLD_snooping host:
DGS-1210-28MP/ME:5# show mld_snooping host vlan_name default
Command: show mld_snooping host vlan_name default