D-Link DGS-1210/ME series - Enable Dhcpv6_Relay; Disable Dhcpv6_Relay; Show Dhcpv6_Relay

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
138
DGS-1210-28MP/ME:5#
enable dhcpv6_relay
Purpose To enable DHCPv6 Relay function on the Switch.
Syntax
enable dhcpv6_relay
Description
The enable dhcpv6_relay command is used to enable the DHCPv6
relay global state on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To enable DCHPv6 Relay on the Switch:
DGS-1210-28MP/ME:5# enable dhcpc6_relay
Command: enable dhcpc6_relay
Success.
DGS-1210-28MP/ME:5#
disable dhcpv6_relay
Purpose To disable DHCPv6 Relay function on the Switch.
Syntax
disable dhcpv6_relay
Description
The disable dhcpv6_relay command
is used to disable the
DHCPv6 relay global state on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To disable DHCPv6 Relay on the Switch:
DGS-1210-28MP/ME:5# disable dhcpv6_relay
Command: disable dhcpv6_relay
Success.
DGS-1210-28MP/ME:5#
show dhcpv6_relay
Purpose To display the current DHCPv6 relay configuration.
Syntax
show dhcpv6_relay {ipif System | option_38 {ports <portlist>}}
Description
The show dhcpv6_relay command displays
the current DHCPv6
relay configuration of all interfaces, or if an IP interface name is
specified, the DHCPv6 relay configuration for that IP interface.