D-Link DGS-1210/ME series - Show Igmp_Snooping Multicast_Vlan_Group; Show Igmp_Snooping Statistic Counter

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
333
DGS-1210-28/ME:5# show igmp_snooping multicast_vlan default
Command: show igmp_snooping multicast_vlan default
Multicast VLAN Global State : Disabled
DES-1210-52/ME:5#
show igmp_snooping multicast_vlan_group
Purpose To display the IGMP snooping multicast vlan group table entries on
the Switch.
Syntax
show igmp_snooping multicast_vlan_group {<vlan_name 32>}
Description
The show igmp_snooping multicast_vlan_group command
displays the current IGMP snooping forwarding ta
ble entries
currently configured on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which IGMP snooping
host table information is to be displayed. Up to 20 characters can be
used.
Restrictions None.
Example usage:
To view the IGMP snooping multicast vlan group information on the Switch:
DGS-1210-28/ME:5# show igmp_snooping multicast_vlan_group
Command: show igmp_snooping multicast_vlan_group
VID Vlan Name IP Range
---- -------------------------------- -----------------------------------------
DES-1210-52/ME:5#
show igmp_snooping statistic counter
Purpose
To display the statistics counter for IGMP protocol packets that are
received by the Switch since IGMP snooping was enabled.
Syntax
show igmp_snooping statistic counter [vlan_name <string 32> |
vlanid <vidlist> | ports <portlist>]
Description
The show igmp_snooping statistic counter command displays
the statistics counter for IGMP protocol packets that are received by
the Switch since IGMP snooping was enabled.
Parameters
vlan_name <string 32> − Specify the VLAN name to be displayed.
vlanid <vidlist> − Specify the VLAN ID to be displayed.
ports <portlist> - Specify a list of ports to be displayed.
Restrictions None.
Example usage:
To display the IGMP snooping statistics counter for VLAN ID 1:
DGS-1210-28MP/ME:5# show igmp_snooping statistic counter vlanid 1