D-Link DGS-1210/ME series - Show Dhcp_Server Screening

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
67
DGS-1210-28MP/ME:5# show filter dhcp_server
Command: show filter dhcp_server
Enabled ports :
Illegal Server Log Suppress Duration : 5 Minutes
DGS-1210-28MP/ME:5#
show dhcp_server screening
Purpose Used to display current DHCP server screening information on the
switch.
Syntax
show dhcp_server screening
Description
The show dhcp_server screening command
is used to display
current DHCP server screening information on the switch.
Parameters None.
Restrictions None.
Example usage:
To display the DHCP server screening information on the switch:
DGS-1210-28/ME:5# show dhcp_server screening
Command: show dhcp_server screening
Illegal Server Log Suppress Duration : 5 Minutes
DHCP server screening :
Port Admin state
---- -----------
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
10 disabled
11 disabled
12 disabled
13 disabled
14 disabled
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL