D-Link DGS-1210/ME series - Delete Filter Dhcpv6_Server Permit_Entry; Show Filter Dhcpv6_Server

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
69
[<portlist> | all]
Description
The create filter dhcpv6_server permit_entry command is used to
create a filter DHCPv6 server permit entry.
Parameters
<ipv6addr> - Specifies the IPv6 address to be configured.
ports [<portlist] | all] – Specifies the list of p
orts or all ports to be
configured.
Restrictions Only administrator or operate-level users can issue this command.
Example usage:
To create thefilter DHCPv6 server permit entry of port 1 to 10 with IPv6 address 3000::5:
DGS-1210-28MP/ME:5# create filter dhcpv6_server permit_entry 3000::5 ports 1-10
Command: create filter dhcpv6_server permit_entry 3000::5 ports 1-10
Success.
DGS-1210-28MP/ME:5#
delete filter dhcpv6_server permit_entry
Purpose Used to delete a filter DHCPv6 server permit entry.
Syntax
delete filter dhcpv6_server permit_entry <ipv6addr>
Description
The delete filter dhcpv6_server permit_entry command is used to
delete a filter DHCPv6 server permit entry.
Parameters
<ipv6addr> -
Specifies the IPv6 address of filter DHCPv6 server
permit entry to be deleted.
Restrictions Only administrator or operate-level users can issue this command.
Example usage:
To delete permit entry from the filter DHCPv6 server forward list:
DGS-1210-28MP/ME:5# delete filter dhcpv6_server permit_entry 3000::5
Command: delete filter dhcpv6_server permit_entry 3000::5
Success.
DGS-1210-28MP/ME:5#
show filter dhcpv6_server
Purpose Used to display the filter DHCPv6 server information.
Syntax
show filter dhcpv6_server
Description
The show filter dhcpv6_server
command is used to display the
filter DHCPv6 server information.
Parameters None.
Restrictions None.
Example usage:
To display the DHCPv6 server information on the switch:
DGS-1210-28MP/ME:5# show filter dhcpv6_server