D-Link DGS-1210/ME series - Enable Mld_Snooping; Disable Mld_Snooping

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
347
Command Parameter
show mld_snooping
mrouter_ports
[vlan_name <string 32> | vlanid <vidlist> | all ] [dynamic | static | forbidden]
show mld_snooping
host
[vlan_name <string 32> | vlanid <vidlist> | all | ports <portlist> | group
<ipv6_addr>]
show mld_snooping
statistic counter
[vlan_name <string 32> | vlanid <vidlist> | ports <portlist>]
clear mld_snooping
statistics counter
Each command is listed in detail, as follows:
enable mld_snooping
Purpose To enable MLD snooping on the Switch.
Syntax
enable mld snooping {multicast_vlan | forward_mcrouter_only}
Description
The enable mld snooping command enables MLD snooping on the
Switch.
Parameters
{multicast_vlan | forward_mcrouter_only} −
Enables the multicast
VLAN or forward mcrouter for MLD Snooping on the Switch.
Restrictions Only administrator, operator or power user–
level users can issue
this command.
Example usage:
To enable the MLD snooping:
DGS-1210-28MP/ME:5# enable mld_snooping
Command: enable mld_snooping
Success.
DGS-1210-28MP/ME:5#
disable mld_snooping
Purpose To disable MLD snooping on the Switch.
Syntax
disable mld snooping {multicast_vlan | forward_mcrouter_only}
Description
The disable mld snooping command disables
MLD snooping on
the Switch.
Parameters
{multicast_vlan | forward_mcrouter_only} −
Disables the multicast
VLAN or forward mcrouter for MLD Snooping on the Switch.
Restrictions Only administrator, operator or power user–
level users can issue
this command.
Example usage:
To disable the MLD snooping:
DGS-1210-28MP/ME:5# disable mld_snooping
Command: disable mld_snooping