D-Link DGS-1210/ME series - Show Dscp_Mapping; Enable Hol_Prevention

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
218
DGS-1210-28MP/ME:5#
show dscp_mapping
Purpose To display the setting of DSCP mapping.
Syntax
show dscp_mapping {dscp_value <value 0-63>}
Description
The show dscp_mapping command displays the mapping of DSCP
value.
Parameters
dscp_value <value 0-63> - The selected value of priority
will be
dispalyed. The value may be between 0 and 63.
Restrictions None.
Example usage:
To display the DSCP mapping with value 10:
DGS-1210-28MP/ME:5# show dscp_mapping dscp_value 10
Command: show dscp_mapping dscp_value 10
DSCP Priority
------------------------
10 1
DGS-1210-28MP/ME:5#
enable hol_prevention
Purpose To enable head of line prevention on the Switch.
Syntax
enable hol_prevention
Description
The enable hol_prevention command
is used to enable head of
line prevention on the Switch.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To enable HOL prevention on the Switch:
DGS-1210-28MP/ME:5# enable hol_prevention
Command: enable hol_prevention
Success.
DGS-1210-28MP/ME:5#