DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
53
DHCP Local Relay:
DHCP/BOOTP Local Relay Status : disabled
DGS-1210-28MP/ME:5#
delete ports
Purpose To delete the current information of ports.
Syntax
delete ports [<portlist> | all] {medium_type [copper | fiber]}
description
Description
The delete ports command deletes the current information of a port
or range of ports.
Parameters
[<portlist> | all] – Specifies a range of ports or all ports information to
be deleted.
medium_type [copper | fiber] – Specifies to delete the medium type
of specified ports.
description – Specifies to delete the description of specified ports.
Restrictions Only administrator or operate-level users can issue this command.
Example usage:
To delete the description of ports 1-3:
DGS-1210-28MP/ME:5# delete ports 1-3 description
Command: delete ports 1-3 description
DGS-1210-28MP/ME:5#
To Next Page
Loading...
