D-Link DGS-1210/ME series - Config Cos Ip_Mapping; Show Cos Ip_Mapping

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
202
config cos ip_mapping
Purpose To configure the CoS IP mapping method.
Syntax
config cos ip_mapping destination_ip <ipaddr> class <class_id
0-7>
Description
The config cos ip_mapping command is used to configure the CoS
IP mapping method on the Switch.
Parameters
<ipaddr> - Specifies the IP address to be mapped.
For example,
10.90.90.99.
<class_id 0-7> - Specifies th
e number of the Switch’s hardware
priority queue.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To configure the CoS IP mapping on the Switch:
DGS-1210-28MP/ME:5# config cos ip_mapping destination_ip 10.0.0.56 class 1
Command: config cos ip_mapping destination_ip 10.0.0.56 class 1
Success.
DGS-1210-28MP/ME:5#
show cos ip_mapping
Purpose To display the CoS IP mapping method.
Syntax
show cos ip_mapping {destination_ip <ipaddr>}
Description
The show cos ip_mapping command is used to display the CoS
MAC mapping method on the Switch.
Parameters
<ipaddr> - Specifies the IP address to be displayed.
For example,
10.90.90.99.
Restrictions None.
Example usage:
To display the CoS ip mapping on the Switch:
DGS-1210-28MP/ME:5# show cos ip_mapping
Command: show cos ip_mapping
IP ADDRESS Class
-------------------------------------------------
10.0.0.56 1
DGS-1210-28MP/ME:5#