D-Link DGS-1210/ME series - Show Ssh Algorithm; Config Ssh User

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
430
DGS-1210-28MP/ME:5# show ssh server
Command: show ssh server
The SSH Server Configuration :
Max Session : 1
Connection Timeout : 120
Authfail Attempts : 20
Rekey Timeout : never
Success.
DGS-1210-28MP/ME:5#
show ssh algorithm
Purpose To display the SSH algorithm setting.
Syntax
show ssh algorithm
Description
The show ssh algorithm command displays the current SSH
algorithm setting status.
Parameters None.
Restrictions None.
Example usage:
To display SSH algorithms cuurently set on the Switch:
DGS-1210-28MP/ME:5# show ssh algorithm
Command: show ssh algorithm
Encryption Algorithm
------------------------------
3DES : Enabled
Data Integrity Algorithm
------------------------------
MD5 : Enabled
SHA1 : Enabled
Public Key Algorithm
------------------------------
RSA : Enabled
Success.
DGS-1210-28MP/ME:5#
config ssh user
Purpose To specify which SSH public key is manually configured.
Syntax
config ssh user <string 15> authmode [hostbased hostname