DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
440
DGS-1210-28MP/ME:5# show authen_policy
Command: show authen_policy
Authentication Policy : Disabled
DGS-1210-28MP/ME:5#
create authen_enable method_list_name
Purpose To create a user-defined method list of authentication methods for
promoting normal user level privileges to Administrator level
privileges on the Switch.
Syntax
create authen_enable method_list_name <string 15>
Description
The create authen_enable method_list_name command creates a
list of authentication methods for promoting users with normal level
privileges to Administrator level privileges using authentication
methods on the Switch. Once a user acquires normal user level
privileges on the Switch, he or she must be authenticated by a
method on the Switch to gain administrator privileges on the Switch,
which is defined by the Administrator. A maximum of eight (8)
enable method lists can be implemented on the Switch.
Parameters
<string 15> - Defines the authen_enable method_list_name to be
created as a string of up to 15 alphanumeric characters.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To create a user-defined method list, named ‘Permit’ for promoting user privileges to Adminstrator privileges:
DGS-1210-28MP/ME:5# create authen_enable method_list_name Permit
Command: create authen_enable method_list_name Permit
Success.
DGS-1210-28MP/ME:5#
Purpose To configure a user-defined method list of authentication methods
for promoting normal user level privileges to Administrator level
privileges on the Switch.
Syntax
config authen_enable [default | method_list_name <string 15>]
method {tacacs+ | radius | local | server_group <string 15> |
none}
Description
The config authen_enable command configures a user-defined list
of authentication methods for promoting normal user level privileges
to Administrator level privileges using authentication methods on the
Switch. Once a user acquires normal user level privileges on the
Switch, he or she must be authenticated by a method on the Switch
to gain administrator privileges on the Switch, which is defined by
the Administrator. A maximum of eight (8) enable method lists can
be implemented simultaneously on the Switch.
To Next Page
Loading...
