D-Link DGS-1210/ME series - Show Erps Ring; Delete Erps Ring; Config Erps Instance State

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
248
show erps ring
Purpose Used to display the ERPS ring on the switch.
Syntax
show erps ring <string 32>
Description
The show erps ring is used to
display ERPS configuration and
operation information.
Parameters
<string 32> - Specify the ring to be displayed.
Restrictions None.
Example usage:
To display an ERPS ring – rdd2 information:
DGS-1210-28MP/ME:5# show erps ring rdd2
Command: show erps ring rdd2
Ethernet Ring : rdd2
West : 0
East : 0
Ring Type : Major ring
Ring ID : 0
DGS-1210-28MP/ME:5#
delete erps ring
Purpose Used to delete the ERPS ring on the switch.
Syntax
delete erps ring <string 32>
Description
The delete erps ring commanmd is used to remove the ERPS ring
on the switch.
Parameters
<string 32> - Specify the ring to be removed.
Restrictions Only Administrator, operator and power user-level users can issue
this command.
Example usage:
To remove an ERPS ring – rdd2:
DGS-1210-28MP/ME:5# delete erps ring rdd2
Command: delete erps ring rdd2
Success.
DGS-1210-28MP/ME:5#
config erps instance state
Purpose Used to configure the state of the specified ring.
Syntax
config erps instance <value 1-16> state [enable | disable]
Description
The config erps instance state commanmd is used to configure