D-Link DGS-1210/ME series - Show Stp Ports

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
177
DGS-1210-28MP/ME:5# show stp
Command: show stp
STP Bridge Global Settings
------------------------------------------------------
STP Status : Enabled
STP Version : RSTP
Bridge Priority : 32768
Max Age : 8
Hello Time : 2
Forward Delay : 15
TX Hold Count : 6
Forward BPDU : Enabled
Root Cost : 0
Root Maximum Age : 8
Root Forward Delay : 15
Root Port : 0
Root Bridge : 80:00:9C:D6:43:60:4F:A4
DGS-1210-28MP/ME:5#
Status 3: STP enabled for MSTP
DGS-1210-28MP/ME:5# show stp
Command: show stp
STP Bridge Global Settings
------------------------------
STP Status : Enabled
STP Version : MSTP
Bridge Priority : 32768
Max Age : 8
Hello Time : 2
Forward Delay : 15
TX Hold Count : 6
Forward BPDU : Enabled
Root Cost : 0
Root Maximum Age : 8
Root Forward Delay : 15
Root Port : 0
Root Bridge : 80:00:9C:D6:43:60:4F:A4
DGS-1210-28MP/ME:5#
show stp ports
Purpose To display the Switch’s current instance_id configuration.
Syntax
show stp ports {<portlist>}