D-Link DGS-1210/ME series - Clear Igmp_Snooping Statistic Counter; Show Router_Ports

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
334
Command: show igmp_snooping statistic counter vlanid 1
VLAN Name : default
-------------------------------------------------------------------
Group Number : 0
Receive Statistics
Query
IGMP v1 Query : 0
IGMP v2 Query : 0
IGMP v3 Query : 0
Total : 0
Dropped By Multicast VLAN : 0
Report & Leave
IGMP v1 Report : 0
IGMP v2 Report : 0
IGMP v3 Report : 0
IGMP v2 Leave : 0
Total : 0
Dropped By Max Group Limitation : 0
Dropped By Multicast VLAN : 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL
clear igmp_snooping statistic counter
Purpose
To clear the IGMP snooping statistics counter.
Syntax
clear igmp_snooping statistic counter
Description
The clear igmp_snooping statistic counter command
used to
clear the IGMP snooping statistics counter.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To clear the IGMP snooping statistics counter:
DGS-1210-28MP/ME:5# clear igmp_snooping statistics counter
Command: clear igmp_snooping statistics counter
Success.
DGS-1210-28MP/ME:5#
show router_ports
Purpose To display the currently configured router ports on the Switch.
Syntax
show router_ports {vlan <vlan_name 32> | vlanid <vidlist> |