DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
335
static | dynamic | forbidden}
Description
The show router_ports
command displays the router ports
currently configured on the Switch.
Parameters
vlan <vlan_name 32> − The name of the VLAN on which the router
port resides. Up to 32 characters can be used.
vlanid <vidlist> − The ID
of the VLAN on which the router port
resides.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically learned.
forbidden − Displays router ports that have been forbidden
configured.
Restrictions None.
Example usage:
To display the router ports.
DGS-1210-28MP/ME:5# show router_ports
Command: show router_ports
VLAN Name : default
Static router port :
Dynamic router port :
Forbidden router port :
Total Entries : 1
DGS-1210-28MP/ME:5#
To Next Page
Loading...
