D-Link DGS-1210/ME series - Delete Rmon Event; Show Rmon; Show Rmon Statistics

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
229
delete rmon event
Purpose To remove the network event.
Syntax
delete rmon event <event_index 1-65535>
Description
The delete rmon event command removes the network
event on
the Switch.
Parameters
<event_index 1-65535> −
Specifies the event number to be
removed.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To delete a RMON event on the Switch:
DGS-1210-28MP/ME:5# delete rmon event 2
Command: delete rmon event 2
Success.
DGS-1210-28MP/ME:5#
show rmon
Purpose To display remote monitoring (RMON) status for the SNMP function.
Syntax
show rmon {event | history {<hist_index 1-65535> | overview}}
Description
The show rmon command displays
remote monitoring (RMON)
status for the SNMP function on the Switch.
Parameters
event − Specifies the event of RMON to be displayed.
history {<hist_index 1-65535> | overview} – Specifies the history of
RMON to be displayed. Specifies the history index or overview of
RMON.
Restrictions None.
Example usage:
To display the RMON feature on the Switch:
DGS-1210-28MP/ME:5# show rmon
Command: show rmon
RMON is enabled
Success.
DGS-1210-28MP/ME:5#
show rmon statistics
Purpose To display remote monitoring (RMON) statistics
for the SNMP
function.
Syntax
show rmon statistics {<stats_index 1-65535>}
Description
The show rmon command displays
remote monitoring (RMON)
status for the SNMP function on the Switch.