D-Link DGS-1210/ME series - Show Lldp Statistics; Show Lldp Power_Pse_Tlv

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
475
show lldp statistics
Purpose
To display the Link Layer Discovery Protocol (LLDP) statistics for the
specified ports.
Syntax
show lldp statistics {ports <portlist>}
Description
The show lldp statistics command displays the statistics of LLDP
on the Switch.
Parameters
ports <portlist> – Specifies the ports to be displayed.
Restrictions None.
Example usage:
To show the LLDP statistics for port 15:
DGS-1210-28MP/ME:5# show lldp statistics ports 15
Command: show lldp statistics ports 15
Port ID : 15
-------------------------------------------------------------------
lldpStatsTxPortFramesTotal : 0
lldpStatsRxPortFramesDiscardedTotal : 0
lldpStatsRxPortFramesErrors : 0
lldpStatsRxPortFramesTotal : 0
lldpStatsRxPortTLVsDiscardedTotal : 0
lldpStatsRxPortTLVsUnrecognizedTotal : 0
lldpStatsRxPortAgeoutsTotal : 0
DGS-1210-28MP/ME:5#
show lldp power_pse_tlv
Purpose
To display the Link Layer Discovery Protocol (LLDP) powers.
Syntax
show lldp power_pse_tlv
Description
The show lldp power_pse_tlv command displays the power of
LLDP on the Switch.
Parameters None.
Restrictions None.
Example usage:
To show the LLDP power PSE status:
DGS-1210-28MP/ME:5# show lldp power_pse_tlv
Command: show lldp power_pse_tlv
Port State
--------------------------------------
1 Disable
2 Disable
3 Disable
4 Disable
DGS-1210-28MP/ME:5#