D-Link DGS-1210/ME series - Clear Ethernet_Oam Ports

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
312
-----------------------------------------------------------------------
Event Listing
Index Type Location Time Stamp
----- ------------------------------------------ ------------- ---------------------
Local Event Statistics
Error Symbol Event : 0
Error Frame Event : 0
Error Frame Period Event : 0
Errored Frame Seconds Event : 0
Dying Gasp : 0
Critical Event : 0
Remote Event Statistics
Error Symbol Event : 0
Error Frame Event : 0
Error Frame Period Event : 0
Errored Frame Seconds Event : 0
Dying Gasp : 0
Critical Event : 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL
clear ethernet_oam ports
Purpose Used to clear Ehternet OAM event log or statistics.
Syntax
clear ethernet_oam ports [<portlist> | all] [event_log |
statistics]
Description
The clear ethernet_oam ports command is used to
clear ports
Ethernet OAM event log or statistics information.
Parameters
[<portlist> | all] −
Specifies a port, a range of ports or all ports
information to be cleared.
[event_log | statistics] − Specifies event log or statistics information
to be cleared.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To clear port 1 OAM statistics:
DGS-1210-28MP/ME:5# clear ethernet_oam ports 1 statistics
Command: clear ethernet_oam ports 1 statistics
Success.
DGS-1210-28MP/ME:5#