D-Link DGS-1210/ME series - Show Mld_Snooping Group; Show Mld_Snooping Mrouter_Ports

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
357
Parameters
vlan_name <string 32> – Displays
that the mld snooping applies
only to this previously created VLAN.
vlanid <vidlist> – Displays that the mld snooping applies only to this
previously created VLAN id.
all – Displays that all MLD snooping which configured for all VLANs
on the Switch.
Restrictions None.
Example usage:
To display the MLD snooping forwarding:
DGS-1210-28MP/ME:5# show mld_snooping forwarding all
Command: show mld_snooping forwarding all
Total Entries : 0
DGS-1210-28MP/ME:5#
show mld_snooping group
Purpose To display mld snooping group settings on the Switch.
Syntax
show mld_snooping group [vlan_name <string 32> | vlanid
<vidlist> | all | ports <portlist>]
Description
The show mld_snooping group
command displays the multicast
groups that were learned by MLD snooping.
Parameters
vlan_name <string 32> – The name of the VLAN for which to view
the MLD snooping group configurations.
vlanid <vidlist> – The id of the VLAN for which to view the MLD
snooping group configurations.
all – Displays that all MLD snooping which configured for all VLANs
on the Switch.
ports <portlist> – The ports of the VLAN for which to view the MLD
snooping group configurations.
Restrictions None.
Example usage:
To show the MLD snooping groups:
DGS-1210-28MP/ME:5# show mld_snooping group all
Command: show mld_snooping group all
Total Entries : 0
DGS-1210-28MP/ME:5#
show mld_snooping mrouter_ports
Purpose
To display information on dynamically learnt and static multicast
router interfaces.
Syntax
show mld_snooping mrouter_ports [vlan_name <string 32> |