D-Link DGS-1210/ME series - Reset Cpu Port

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
30
Description
The show cpu port command displays the CPU port information.
Parameters None.
Restrictions Only Administrator users can issue this command.
Example usage:
To display the CPU port information:
DGS-1210-28MP/ME:5# show cpu port
Command: show cpu port
Type Total Diff
--------------------------- ---------- -----------
ARP 0
DHCP 0
DHCPv6 0
GVRP 0
ICMP 0
ICMPv6 0
IGMP 0
LACP 0
LLDP 0
PPPoE 0
Reserved Multicast 0
STP 0
TELNET 0
UDP 0
DGS-1210-28MP/ME:5#
reset cpu port
Purpose To reset the CPU port information.
Syntax
reset cpu port
Description
The reset cpu port command resets the CPU port information.
Parameters None.
Restrictions Only Administrator users can issue this command.
Example usage:
To reset the CPU port information:
DGS-1210-28MP/ME:5# reset cpu port
Command: reset cpu port
Success.
DGS-1210-28MP/ME:5#