D-Link DGS-1210/ME series - Show Filter Icmpv6_Ra_All_Node

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
72
Success.
DGS-1210-28MP/ME:5#
show filter icmpv6_ra_all_node
Purpose Used to display the filter ICMPv6 RA all-nodes information.
Syntax
show filter icmpv6_ra_all_node
Description
The show filter icmpv6_ra_all_node command is used to display
the filter ICMPv6 RA all-nodes information.
Parameters None.
Restrictions None.
Example usage:
To display filter ICMPv6 RA all-nodes information:
DGS-1210-28MP/ME:5# show filter icmpv6_ra_all_node
Command: show filter icmpv6_ra_all_node
Enabled ports : 1-8
ICMPv6 RA Filter Syslog State : Enable
Permit ICMPv6 RA Server/Client Table:
Server IP Address Ports
------------------------------------------- ----------------
3000::6 5
Success.
DGS-1210-28MP/ME:5#