D-Link DGS-1210/ME series - Delete Cos Ipv6_Tc_Mapping; Show Cos Ipv6_Tc_Mapping

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
205
To configure the CoS IPv6 TC mapping on the Switch:
DGS-1210-28MP/ME:5# config cos ipv6_tc_mapping trafficclass 1 class 2
Command: config cos ipv6_tc_mapping trafficclass 1 class 2
Success.
DGS-1210-28MP/ME:5#
delete cos ipv6_tc_mapping
Purpose To remove the CoS IPv6 mapping method.
Syntax
delete cos ipv6_tc_mapping trafficclass <class_id 0-255>
Description
The delete cos ipv6_tc_mapping command is used to delete the
CoS IPv6 TC mapping method on the Switch.
Parameters
trafficclass <class_id 0-255>> -
Specifies the IPv6 TC mapping
traffic class to be removed.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To delete the CoS ipv6 TC mapping on the Switch:
DGS-1210-28MP/ME:5# delete cos ipv6_tc_mapping trafficclass 1
Command: delete cos ipv6_tc_mapping trafficclass 1
Success.
DGS-1210-28MP/ME:5#
show cos ipv6_tc_mapping
Purpose To display the CoS IPv6 mapping method.
Syntax
show cos ipv6_tc_mapping {trafficclass <class_id 0-255>}
Description
The show cos ipv6_tc_mapping command is used to delete the
CoS IPv6 TC mapping method on the Switch.
Parameters
trafficclass <class_id 0-255>> - Speci
fies the IPv6 TC mapping
traffic class to be removed.
Restrictions None.
Example usage:
To display the CoS ipv6 TC mapping on the Switch:
DGS-1210-28MP/ME:5# show cos ipv6_tc_mapping trafficclass 10
Command: show cos ipv6_tc_mapping trafficclass 10
IPv6 Traffic TC Class
---------------------------------------------------------------
DGS-1210-28MP/ME:5#