D-Link DGS-1210/ME series - Show Stp Instance

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
178
Description
The show stp ports command displays the STP Instance Settings
and STP Instance Operational Status currently implemented on the
Switch.
Parameters
<portlist> – A port or range of ports to be configured. The port list is
specified by listing switch number and the beginning port number on
that switch, separated by a colon. Then the highest port number of
the range is specified. The beginning and end of the port list range
are separated by a dash.
Restrictions None.
Example usage:
To show stp port 1 on switch one:
DGS-1210-28MP/ME:5# show stp ports 1
Command: show stp ports 1
MSTP Port Information
----------------------------------------------------------------
Port Index:1 , Port STP:Enabled , P2P:Auto ,
External PathCost : 19 , Edge Port:Auto ,
Port RestrictedRole:False , Port RestrictedTCN:False
Port Priority:128 , Port Forward BPDU:Enabled ,
MSTI DGSignated Bridge Internal PathCost Prio Status Role
------- -------------------------- ----------------------- ---- ---------- ----------
0 80:00:00:B2:FD:DA:EE:EB 200000 128 Disabled Disabled
DGS-1210-28MP/ME:5#
show stp instance
Purpose To display the Switch’s STP instance configuration
Syntax
show stp instance {<value 1-63>}
Description
The show stp instance
command displays the Switch’s current
STP Instance Settings and the STP Instance Operational Status.
Parameters
<value 1-63> - The value of the previously configured instance_id on
the Switch. The value may be between 1 and 63.
Restrictions None.
Example usage:
To display the STP instance configuration on the Switch:
DGS-1210-28MP/ME:5# show stp instance
Command: show stp instance
## CIST
Designated Root Bridge 00:00:00:00:00:00 Priority 0
We are the Root for CST
Port 0 , path cost 0
Regional Root Bridge 00:00:00:00:00:00 Priority 0
Path cost 0