D-Link DGS-1210/ME series - Command History List Commands

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
421
56
COMMAND HISTORY LIST COMMANDS
The Command History List commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
Parameter
?
show
command_history
dir
Each command is listed in detail, as follows:
?
Purpose To display all commands in the Command Line Interface (CLI).
Syntax
?
Description
The ? command displays all of the commands available through the
Command Line Interface (CLI).
Parameters
{<command>} – Lists all the corresponding parameters for the
specified command, along with a brief Description of the command’s
function and similar commands having the same words in the
command.
Restrictions None.
Example usage:
To display all of the commands in the CLI: