Enterasys D-Series

clear lldp port trap
5-28 Discovery Protocol Configuration
Syntax
clear lldp port status port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexamplereturnsportge.1.1tothedefaultstateofenabledforbothtransmittingand
processingreceivedLLDPDUs.
D2(rw)->clear lldp port status ge.1.1
clear lldp port trap
UsethiscommandtoreturntheportLLDPtrapsettingtothedefaultvalueofdisabled.
Syntax
clear lldp port trap port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexamplereturnsportge.1.1tothedefaultLLDPtrapstateofdisabled.
D2(rw)->clear lldp port trap ge.1.1
clear lldp port med-trap
UsethiscommandtoreturntheportLLDP‐MEDtrapsettingtothedefaultvalueofdisabled.
Syntax
clear lldp port med-trap port-string
port‐stringSpecifiestheportorrangeofportstobeaffected.
port‐string Specifiestheportorrangeofportstobeaffected.