Enterasys D-Series - Set Maclock Disable; Set Maclock

set maclock disable
Enterasys D-Series CLI Reference 17-55
set maclock disable
UsethiscommandtodisableMAClockinggloballyorononeormoreports.
Syntax
set maclock disable [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,MAClockingwillbedisabledgloballyonthestackorstandalone
device.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodisableMAClockingonfe.2.3:
D2(su)->set maclock disable fe.2.3
set maclock
UsethiscommandtocreateastaticMACaddress‐to‐portlocking,andtoenableordisableMAC
lockingforthespecifiedMACaddressandport.
Syntax
set maclock mac-address port-string {create | enable | disable}
Parameters
Defaults
None.
port‐string (Optional)DisablesMAClockingonspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 6‐1.
mac‐address SpecifiestheMACaddressforwhichMAClockingwillbecreated,
enabledordisabled.
port‐string Specifiestheportonwhichtocreate,enableordisableMAClockingfor
thespecifiedMAC.Foradetaileddescriptionofpossibleport‐string
values,referto“PortStringSyntaxUsedintheCLI
”onpage 6‐1.
create EstablishesaMAClockingassociationbetweenthespecifiedMAC
addressandport.CreateautomaticallyenablesMAClockingbetween the
specifiedMACaddressandport.
enable|disable EnablesordisablesMAClockingbetweenthespecifiedMACaddressand
port.