Enterasys D-Series

set pwa guestpassword
Enterasys D-Series CLI Reference 17-69
set pwa guestpassword
UsethiscommandtosettheguestuserpasswordforPWAnetworking.
Syntax
set pwa guestpassword
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
PWAwillusethispasswordandtheguestusernametograntnetworkaccesstoguestswithout
establishedloginnamesandpasswords.
Example
ThisexampleshowshowtosetthePWAguestuserpasswordname:
D2(su)->set pwa guestpassword
Guest Password: *********
Retype Guest Password: *********
set pwa gueststatus
Usethiscommandtoenableordisableguestnetworkingforportwebauthentication.
Syntax
set pwa gueststatus {authnone | authradius | disable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
authnone Enablesguestnetworkingwithnoauthenticationmethod.
authradius EnablesguestnetworkingwithRADIUSauthentication.Uponsuccessful
authenticationfromRADIUS,PWAwillapplythepolicyreturnedfrom
RADIUStothePWAport.
disable Disablesguestnetworking.