Enterasys D-Series

clear maclock agefirstarrival
17-60 Security Configuration
Example
Thisexampleenablesfirstarrivalagingonportge.1.1.
D2(su)-> set maclock agefirstarrival ge.1.1 enable
clear maclock agefirstarrival
Usethiscommandtoresetfirstarrivalagingononeormoreportstoitsdefaultstateofdisabled.
Syntax
clear maclock agefirstarrival port-string
Parameters
Defaults
None.
Mode
Switchmode,read‐write.
Example
Thisexampledisablesfirstarrivalagingonportge.1.1.
D2(su)-> clear maclock agefirstarrival ge.1.1 enable
set maclock move
UsethiscommandtomoveallcurrentfirstarrivalMACstostaticentries.
Syntax
set maclock move port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
port‐string Specifiestheport(s)onwhichtodisablefirstarrival aging.Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 6‐1.
port‐string SpecifiestheportonwhichMACwillbemovedfromfirstarrivalMACs
tostaticentries.Foradetaileddescriptionofpossibleport‐stringvalues,
referto“PortStringSyntaxUsedintheCLI”onpage 6‐1.