EasyManua.ls Logo

Enterasys D-Series

Enterasys D-Series
540 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
clear lldp port tx-tlv
Enterasys D-Series CLI Reference 5-29
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexamplereturnsportge.1.1tothedefaultLLDP‐MEDtrapstateofdisabled.
D2(rw)->clear lldp port med-trap ge.1.1
clear lldp port tx-tlv
UsethiscommandtocleartheoptionalLLDPandLLDP‐MEDTLVs tobetransmittedin
LLDPDUsbythespecifiedportorportstothedefaultvalueofdisabled.
Syntax
clear lldp port tx-tlv {[all] | [port-desc] [sys-name] [sys-desc] [sys-cap] [mgmt-
addr] [vlan-id] [stp] [lacp] [gvrp] [mac-phy] [poe] [link-aggr] [max-frame] [med-
cap] [med-loc] [med-poe]} port-string
Parameters
port‐string Specifiestheportorrangeofportstobeaffected.
all DisablesalloptionalTLVsfrombeingtransmittedinLLDPDUs.
port‐desc DisablesthePortDescriptionoptionalbasicLLDPTLVfrombeing
transmittedinLLDPDUs.
sys‐name DisablestheSystemNameoptionalbasicLLDPTLVfrombeing
transmittedinLLDPDUs.
sys‐desc DisablestheSystemDescriptionoptionalbasicLLDPTLVfrombeing
transmittedin
LLDPDUs.
sys‐cap DisablestheSystemCapabilitiesoptionalbasicLLDPTLVfrom
beingtransmittedinLLDPDUs.
mgmt‐addr DisablestheManagementAddressoptionalbasicLLDPTLVfrom
beingtransmittedinLLDPDUs.
vlan‐id DisablesthePortVLANIDIEEE802.1ExtensionsTLVfrombeing
transmittedinLLDPDUs.
stp DisablestheSpanningTreeinformation
definedbyProtocolIdentity
IEEE802.1ExtensionsTLVfrombeingtransmittedinLLDPDUs.
lacp DisablestheLACPinformationdefinedbyProtocolIdentityIEEE
802.1ExtensionsTLVfrombeing transmittedinLLDPDUs.
gvrp DisablestheGVRPinformationdefinedbyProtocolIdentityIEEE
802.1ExtensionsTLVfrombeing transmittedinLLDPDUs.
mac‐phy Disables
theMAC‐PHYConfiguration/StatusIEEE802.3Extensions
TLVfrombeingtransmittedinLLDPDUs.

Table of Contents

Related product manuals