Enterasys D-Series

clear linkflap
Enterasys D-Series CLI Reference 6-29
Parameters
Defaults
Ifport‐stringisnotspecified,allportsdisabledbyalinkflapviolationwillbemadeoperational.
Mode
Switchmode,read‐write.
Example
Thisexampleshowshowtomakedisabledportfe.1.4operational.
D2(rw)->clear linkflap down fe.1.4
clear linkflap
Usethiscommandtoclearalllinkflapoptionsand/orstatisticsononeormoreports.
Syntax
clear linkflap {all | stats [port-string] | parameter port-string {threshold |
interval | downtime | all}
Parameters
Defaults
Ifport‐stringisnotspecified,settingsand/orstatisticswillbeclearedonallports.
Mode
Switchmode,read‐write.
Example
Thisexampleshowshowtoclearalllinkflapoptionsonportfe.1.4.
D2(rw)->clear linkflap all fe.1.4
port‐string (Optional)Specifiestheportstomakeoperational.
all|stats Clearsalloptionsandstatistics,orclearsonlystatistics.
parameter Clearslinkflapparameters.
threshold|interval|
downtime|all
Clearslinkflapthreshold,interval,downtimeorallparameters.
port‐string (Optionalunlessparameterisspecified)Specifiestheport(s)onwhich
toclearsettings.