Enterasys D-Series

clear rmon capture
15-24 RMON Configuration
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocreateRMONcaptureentry1to“listen”onchannel628:
D2(rw)->set rmon capture 1 628
clear rmon capture
UsethiscommandtoclearsanRMONcaptureentry.
Syntax
clear rmon capture index
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearRMONcaptureentry 1:
D2(rw)->clear rmon capture 1
index Specifiesthecaptureentrytobecleared.