Enterasys D-Series

show multiauth
17-34 Security Configuration
show multiauth
Usethiscommandtodisplaymultipleauthenticationsystemconfiguration.
Syntax
show multiauth
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaymultipleau thenticationsystemconfiguration:
D2(rw)->show multiauth
Multiple authentication system configuration
-------------------------------------------------
Supported types : dot1x, pwa, mac
Maximum number of users : 768
Current number of users : 2
System mode : multi
Default precedence : dot1x, pwa, mac
Admin precedence : dot1x, pwa, mac
Operational precedence : dot1x, pwa, mac
set multiauth precedence 17-36
clear multiauth precedence 17-36
show multiauth port 17-37
set multiauth port 17-37
clear multiauth port 17-38
show multiauth station 17-39
show multiauth session 17-39
show multiauth idle-timeout 17-40
set multiauth idle-timeout 17-41
clear multiauth idle-timeout 17-42
show multiauth session-timeout 17-42
set multiauth session-timeout 17-43
clear multiauth session-timeout 17-44
For information about... Refer to page...