To Next Page

To Previous Page

set cos port-resource

11-26 Policy Classification Configuration

Defaults

None.

Mode

Switchcommand,read‐write.

Usage

Thedefaultportgroup0.0cannotbedeleted.

Example

ThisexampledeletesallPortGroupsexceptfortheDefaultgroup0.0:

D2(su)->clear cos port-config irl all

set cos port-resource

UsethiscommandtosettheinboundratelimitparametersforaspecificIRLresourceforaspecific

portgroup.

Syntax

set cos port-resource irl group-type-index irl-index {[unit {kbps}] [rate rate]

[type {drop}]}

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

irl SetanIRLportresource.

group‐type‐index Specifiesaninboundratelimitingportgroup/typeindex.Validentriesare

intheformofgroup#.port‐type.

Validvaluesforgroup#canrangefrom0to7. Validvaluesforport‐type

canrangefrom0to1,although

onlyporttype0iscurrentlysupported.

Forexample,portgroup3wouldbespecifiedas3.0.

irl‐index Indexnumberoftheinboundratelimiterresourceassociatedwiththis

entry.Validvaluesrangefrom0to99.

unit Unitofmeasurefortheinboundratelimiter(onlyoptionisKbps).

kbps Kilobits

persecond.

raterate Datarateforthisinboundratelimiter.Thisistheactual rate limit.Valid

valuesrangefrom512to1,000,000KbpsforaGigabitport.

typedrop Actionfortheratelimiter.Theonlyactionoptionisdroptheframeifall

limitersareexceeded.

Enterasys D-Series User Manual

Questions and Answers: