Enterasys D-Series User Manual

set pwa enhancedmode
Enterasys D-Series CLI Reference 17-73
set pwa enhancedmode
ThiscommandenablesPWAURLredirection.TheswitchinterceptsallHTTP packetsonport80
fromtheenduser,andsendstheenduserarefreshpagedestinedforthe PWAIPAddress
configured.
Syntax
set pwa enhancedmode {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoenablePWAenhancedmode:
D2(su)->set pwa enhancedmode enable
enable|disable EnablesordisablesPWAenhancedmode.

Enterasys D-Series Specifications

General

Brand	Enterasys
Model	D-Series
Category	Switch
Language	English