Enterasys D-Series - Delete; Show Tftp Settings

delete
Enterasys D-Series CLI Reference 2-41
delete
UsethiscommandtoremoveanimageoraCLIconfigurationfilefromtheswitch.
Syntax
delete filename
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Usethedircommand(page2‐37)todisplaycurrentimageandconfigurationfilenames.
Example
Thisexampleshowshowtodeletethe“Jan1 _2004.cfg”configuration file:
D2(su)->delete configs/Jan1_2004.cfg
show tftp settings
UsethiscommandtodisplayTFTPsettingsusedbytheswitchduringdatatransfersusingTFTP.
Syntax
show tftp settings
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Usage
TheTFTPtimeoutvaluecanbesetwiththesettftptimeoutcommand.TheTFTPretryvaluecan
besetwiththesettftpretrycommand.
filename Specifiesthelocalpathnametothefile.Validdirectoriesare/imagesand
/configs.44.