show policy capability
11-8 Policy Classification Configuration
|admin|Port |ge.1.1 |16|ge.1.1 | A|NV| | 1|?|
|admin|Port |ge.1.2 |16|ge.1.2 | A|NV| | 1|?|
|admin|Port |ge.1.3 |16|ge.1.3 | A|NV| | 1|?|
|admin|Port |ge.1.4 |16|ge.1.4 | A|NV| | 1|?|
|admin|Port |ge.1.5 |16|ge.1.5 | A|NV| | 1|?|
|admin|Port |ge.1.6 |16|ge.1.6 | A|NV| | 1|?|
|admin|Port |ge.1.7 |16|ge.1.7 | A|NV| | 1|?|
|admin|Port |ge.1.8 |16|ge.1.8 | A|NV| | 1|?|
|admin|Port |ge.1.9 |16|ge.1.9 | A|NV| | 1|?|
|admin|Port |ge.1.10 |16|ge.1.10 | A|NV| | 1|?|
|admin|Port |ge.1.11 |16|ge.1.11 | A|NV| | 1|?|
|admin|Port |ge.1.12 |16|ge.1.12 | A|NV| | 1|?|
Table 11‐29providesanexplanationofthecommandoutput.
show policy capability
UsethiscommandtodisplaydetailedpolicyclassificationcapabilitiessupportedbyyourD‐Series
device.
Syntax
show policy capability
Parameters
None.
Defaults
None.
Table 11-29 show policy rule Output Details
Output Field What It Displays...
PID Profile index number. Assigned to this classification rule with the set policy profile
command (“set policy profile” on page 11-3).
Rule Type Type of classification rule. Refer to Table 11-30 for valid types.
Rule Data Rule data value. Refer to Table 11-30 for valid values for each classification type.
Mk Rule data mask. Refer to Table 11-30 for valid values for each classification data
value.
PortStr Ingress port(s) to which this rule applies.
RS Whether or not the status of this rule is active (A), not in service or not ready.
ST Whether or not this rule’s storage type is non-volatile (NV) or volatile (V).
VLAN VLAN ID to which this rule applies and whether or not matching packets will be
dropped or forwarded.
CoS If applicable, Class of Service value to which this rule applies.
U Whether or not this rule has been used.
dPID Whether or not this is a dynamic profile ID.
aPID Whether or not this is an administrative profile ID.
To Next Page
Loading...
Need help?
General