Enterasys D-Series

Configuring Diffserv Policies and Assigning Classes
Enterasys D-Series CLI Reference 10-9
Example
ThisexampleshowshowtorenametheDiffserv“admin”classto“system”:
D2(rw)->set diffserv class rename admin system
Configuring Diffserv Policies and Assigning Classes
Purpose
Toreview,create,andconfigureDiffservpoliciesandassignclasses.
Commands
show diffserv policy
UsethiscommandtodisplayinformationaboutDiffservpolicies.
Syntax
show diffserv policy {summary | detailed policyname}
Parameters
Defaults
None.
Mode
Switchcommand.Read‐Only.
For information about... Refer to page...
show diffserv policy 10-9
set diffserv policy create 10-10
set diffserv policy delete 10-10
set diffserv policy class 10-11
set diffserv policy mark 10-11
set diffserv policy police style simple 10-12
set diffserv policy police action conform 10-13
set diffserv policy police action nonconform 10-13
set diffserv policy rename 10-14
summary DisplaysDiffservpolicysummaryinformation.
detailed
policyname
DisplaysdetailedDiffservinformationforaspecificpolicy.