Enterasys D-Series User Manual

Setting Basic Switch Properties
Enterasys D-Series CLI Reference 2-9
Setting Basic Switch Properties
Purpose
TodisplayandsetthesystemIPaddressandotherbasicsystem(switch)properties.
Commands
For information about... Refer to page...
show ip address 2-10
set ip address 2-10
clear ip address 2-11
show ip protocol 2-11
set ip protocol 2-12
show system 2-12
show system hardware 2-14
show system utilization 2-14
show system enhancedbuffermode 2-15
set system enhancedbuffermode 2-16
show time 2-16
set time 2-17
show summertime 2-17
set summertime 2-18
set summertime date 2-18
set summertime recurring 2-19
clear summertime 2-20
set prompt 2-20
show banner motd 2-21
set banner motd 2-21
clear banner motd 2-22
show version 2-22
set system name 2-23
set system location 2-24
set system contact 2-24
set width 2-25
set length 2-26
show logout 2-26
set logout 2-27

Enterasys D-Series Specifications

General

Brand	Enterasys
Model	D-Series
Category	Switch
Language	English