Enterasys D-Series - Clear Dhcp Pool Netbios-Node-Type; Set Dhcp Pool Netbios-Node-Type

set dhcp pool netbios-node-type
16-26 DHCP Server Configuration
Mode
Switchcommand,read‐write.
Example
ThisexampleremovestheNetBIOSnameserverlistfromtheaddresspoolauto1.
D2(rw)->clear dhcp pool auto1 netbios-name-server
set dhcp pool netbios-node-type
UsethiscommandtospecifyaNetBIOSnode(server)typefortheDHCPclientsservedbythe
addresspoolbeingconfigured.
Syntax
set dhcp pool poolname netbios-node-type {b-node | h-node | p-node | m-node}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexamplespecifieshybridastheNetBIOSnodetypefortheaddresspool“auto1.”
D2(rw)->set dhcp pool auto1 netbios-node-type h-node
clear dhcp pool netbios-node-type
UsethiscommandtoremovetheNetBIOSnodetypefromtheaddresspoolbeingconfigured.
Syntax
clear dhcp pool poolname netbios-node-type
Parameters
poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31
charactersinlength.
b‐node SpecifiestheNetBIOsnodetypetobebroadcast(noWINS).
h‐node SpecifiestheNetBIOsnodetypetobehybrid(WINS,thenbroadcast).
p‐node SpecifiestheNetBIOsnodetypetobepeer(WINS
only).
m‐node SpecifiestheNetBIOsnodetypetobemixed(broadcast,thenWINS).
poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31
charactersinlength.