Enterasys D-Series - Show Port; Show Port Status

show port
6-4 Port Configuration
show port
Usethiscommandtodisplaywhetherornotoneormoreportsareenabledforswitching.
Syntax
show port [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,operationalstatusinformationforallportswillbedisplayed.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplayoperationalstatusinformationforfe.3.14:
D2(su)->show port fe.3.14
Port fe.3.14 enabled
show port status
Usethiscommandtodisplayoperatingandadminstatus,speed,duplexmodeandporttypefor
oneormoreportsonthedevice.
Syntax
show port status [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,statusinformationforallportswillbedisplayed.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaystatusinformationforfe.3.14:
D2(su)->show port status fe.3.14
Port Alias Oper Admin Speed Duplex Type
port‐string (Optional)Displaysoperationalstatusforspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage6‐1.
port‐string (Optional)Displaysstatus forspecificport(s).Foradetaileddescriptionof
possibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”on
page6‐1.