Enterasys D-Series - Set Port Negotiation; Show Port Advertise

set port negotiation
6-16 Port Configuration
Example
Thisexampleshowshowtodisplayauto‐negotiationstatusfor1‐GigabitEthernetport14inslot 3:
D2(su)->show port negotiation ge.3.14
auto-negotiation is enabled on port ge.3.14.
set port negotiation
Usethiscommandtoenableordisableauto‐negotiationononeormoreports.
Syntax
set port negotiation port-string {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtodisableauto‐negotiationon1‐GigabitEthernetport3insl ot14:
D2(su)->set port negotiation ge.3.14 disable
show port advertise
Usethiscommandtodisplayportcapabilityandadvertisementasfarasspeedandduplexfor
auto‐negotiation.
Syntax
show port advertise [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,advertisementforallportswillbedisplayed.
Mode
Switchcommand,read‐only.
port‐string Specifiestheport(s)forwhichtoenableordisableauto‐negotiation.Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage6‐1.
enable|disable Enablesordisablesauto‐negotiation.
port‐string (Optional)Displaysadvertisedabilityforspecificport(s).Fora
detaileddescripti onofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage6‐1.