Enterasys D-Series

show cos unit
Enterasys D-Series CLI Reference 11-31
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheCoSinboundratelimitingreferenceconfigurationforall
groups:
D2(su)->clear cos reference irl all
show cos unit
UsethiscommandtoshowpossibleCoSunitentries.
Syntax
show cos unit
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowspossibleunitentriesforinboundratelimiting:
D2(su)->show cos unit
Type: Unit:
irl = inbound rate limiting Kbps = Kilobits per second
Port Type Type Unit Maximum Rate Minimum Rate Granularity
--------- ---- ---- ------------ ------------ -----------
0 irl Kbps 1000000 512 1
clear cos all-entries
UsethiscommandtoclearallClassofServiceentriesexceptentries0‐7.
Syntax
clear cos all-entries
Parameters
None.