Enterasys D-Series

clear policy rule
11-12 Policy Classification Configuration
Examples
ThisexampleshowshowtouseTable 11‐30toassignaruletopolicyprofile3thatwillfilter
EthernetIIType1526framestoVLAN7:
D2(su)->set policy rule 3 ether 1526 vlan 7
ThisexampleshowshowtouseTable 11‐30toassignaruletopolicyprofile5thatwillforward
UDPframesfromsourceport45:
D2(su)->set policy rule 5 udpportsource 45 forward
ThisexampleshowshowtouseTable 11‐30toassignaruletopolicyprofile1thatwilldropIP
sourcetrafficfromIPaddress1.2.3.4.Ifmask32isnotspecifiedasshown,adefaultmaskof48bits
(IPaddress+port)wouldbeapplied:
D2(su)->set policy rule 1 ipsourcesocket 1.2.3.4 mask 32 drop
clear policy rule
Usethiscommandtodeletepolicyclassificationruleentries.
Syntax
Thiscommandhastwoformsof syntax—onetoclearanadminrule(forpolicyID0),andtheother
toclearaclassificationrule.
clear policy rule admin-profile {vlantag data [mask mask]
clear policy rule profile-index {all-pid-entries | {ether | icmptype | ipproto|
ipdestsocket| ipsourcesocket | iptos | macdest | macsource | tcpdestport |
tcpsourceport | udpdestport | udpsourceport}}
icmptype ICMP Type: a.b 1- 16
ipproto Protocol field in IP packet:
0 - 255 or 0 - 0xFF
1- 8
Destination or Source IP Address:
ipdestsocket
ipsourcesocket
IP Address in dotted decimal
format: 000.000.000.000 and
(Optional) post-fixed port: 0 -
65535
1 - 48
iptos Type of Service field in IP packet:
0 - 252 or 0 - 0xFC
1- 8
Destination or Source MAC:
macdest
macsource
MAC Address: 00-00-00-00-00-
00
1 - 48
Destination or Source TCP port:
tcpdestport
tcpsourceport
TCP Port Number:
0 - 65535 or 0 - 0xFFFF
1 - 16
Destination or Source UDP port:
udpsourceport
udpdestport
UDP Port Number:
0 - 65535 or 0 - 0xFFFF
1 -
16
vlantag VLAN tag: 1- 4094 1 -12
Table 11-30 Valid Values for Policy Classification Rules (Continued)
Classification Rule Parameter data value mask bits