Enterasys D-Series

set diffserv policy rename
10-14 Differentiated Services Configuration
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtosetthepolicyingactiontodropforpacketsnotconformingtothe
Diffservpolicy“admin,”class“system.”
D2(rw)->set diffserv policy police action nonconform drop admin system
set diffserv policy rename
UsethiscommandtochangethenameofaDiffservpolicy.
Syntax
set diffserv policy rename policyname newpolicyname
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtorenamethe“admin”Diffservpolicyto“system”:
D2(rw)->set diffserv policy rename admin system
Assigning Policies to Service Ports
Purpose
ToreviewandassignDiffservpoliciesandtheirassociatedclassestoserviceports.
policyname Specifiesthepolicynamebeingconfigured.
classname SpecifiesaDiffservclasstoassociatetothispolicingaction.
markdscp|markprec SpecifiesapolicingactionbasedonIPDHCPorprecedence.
value SpecifiesanIPDHCPorprecedencevaluesetwith
thesetdiffserv
policymarkcommand(page10‐11).
policyname SpecifiesthepolicynamepreviouslysetforthisnewDiffservclass.
newpolicyname Specifiesanewpolicyname.