Enterasys D-Series

show banner motd
Enterasys D-Series CLI Reference 2-21
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthecommandprompttoSwitch1:
D2(su)->set prompt “Switch 1”
Switch 1(su)->
show banner motd
Usethiscommandtoshowthebannermessageofthedaythatwilldisplayatsessionlogin.
Syntax
show banner motd
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaythebannermessageoftheday:
D2(rw)->show banner motd
O Knights of Ni, you are just and
fair, and we will return with a shrubbery
-King Arthur
set banner motd
Usethiscommandtosetthebannermessageofthedaydisplayedatsessionlogin.
Syntax
set banner motd message
Note: Banner message text must be enclosed in beginning and ending double quotation marks.
The message itself cannot contain any additional double quotation marks.