Enterasys D-Series

clear port ratelimit
Enterasys D-Series CLI Reference 12-13
clear port ratelimit
Usethiscommandtoclearratelimitingparametersforoneormoreports.
Syntax
clear port ratelimit port-string [index]
Parameters
Defaults
Ifnotspecified,allindexentrieswillbereset.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearallratelimitingparametersonportfe.2.1.
D2(su)->clear port ratelimit fe.2.1
port‐string Specifiestheport(s)onwhichtoclearratelimiting.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4‐1.
index (Optional)Specifiestheassociatedresourceindextobereset.