Enterasys D-Series

show spantree vlanlist
Enterasys D-Series CLI Reference 8-15
D2(su)->clear spantree mstmap 2
show spantree vlanlist
UsethiscommandtodisplaytheSpanningTreeID(s)assignedtooneormoreVLANs.
Syntax
show spantree vlanlist [vlan-list]
Parameters
Defaults
Ifnotspecified,SIDassignmentwillbedisplayedforallVLANs.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaytheSIDsmappedtoVLAN1.Inthiscase,SIDs2,16and42
aremappedtoVLAN1.Forthisinformationtodisplay,theSIDinstancemustbecreatedusingthe
setspantreemsticommandasdescribedin“setspantreemsti”onpage 8
‐12,andtheFIDsmust
bemappedtoSID 1usingthesetspantreemstmapcommandasdescribedin“setspantree
mstmap”onpage 8‐14:
D2(su)->show spantree vlanlist 1
The following SIDS are assigned to VLAN 1: 2 16 42
show spantree mstcfgid
UsethiscommandtodisplaytheMSTconfigurationidentifierelements,includingformatselector,
configurationname,revisionlevel,andconfigurationdigest.
Syntax
show spantree mstcfgid
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaytheMSTconfigurat ionidentifierelements.Inthiscase,the
defaultrevisionlevelof0,andthedefaultconfigurationname(astringrepresentingthebridge
vlan‐list (Optional)DisplaysSIDsassignedtospecificVLAN(s).